|
|
|
 Elastomer Test System |
|
 |
[ELASTOMER TEST SYSTEM (1,000Hz, MTS)]
The 831.50 was developed for tests of material properties as well as components such as engine mounts,
bushings, transmission mounts, and other vibration damping and control elements.
Test Limit : Weight 1,000kgf
Frequency Range : 0.01 to 1,000 Hz,
with +/-10 kN force and displacements of +/-20 mm. |
|
|
| Rubber
Static & Fatigue Tester |
|
 |
[RUBBER STATIC & FATIGUE
TESTER(3TON)]
For testing Weight Resistance.
Under the simulated Up-Down exercising, it is tested
Strain(Deformation) degree.
Test Limit : Weight - 20,000kgf
Degree of Angle - ±15°
HZ - 2.5 HZ |
|
|
| Rubber
Torsion & Fatigue Tester |
|
 |
[RUBBER TORSION FATIGUE TESTER
(2TON)]
For testing the Endurance from the twist pressure.
By twisting the good with the specific regular weight, it is
tested
good's Endurance and Abrasion degree.
Test Limit : Weight - 2,000kgf
Degree of Angle - Max 45°
HZ - 2 HZ |
|
|
| Rubber
Adhesive Tester |
|
 |
[RUBBER ADHESIVE TESTER (20TON)]
For testing the Adhesive strength.
By Stretching and Pressing the good, it is tested the Adhesion
Degree.
Testing Limit : Weight - 20,000kgf |
|
|
| Low
Temp Test Chamber High Temp Test Chamber |
|
 |
[LOW TEMP TEST CHAMBER]
For testing Cold Resistance.
By keeping the Rubber Sample in cold(freeze) storage, it is
tested the Cold Resistance.
Testing Limit : Temperature - 40°
[HIGH TEMP TEST CHAMBER]
For testing Heat Resistance of Rubber Sample.
By Heating the good, it is tested Rubber Sample's Deterioration
degree of Hardness, Tension, Elongation. |
|
|
|
Rheo Meter |
|
 |
[RHEO METER]
For testing the Specific Rubber Vulcanizing character.
It is tested before the Vulcanization Process to find out the
Standard Data of so different and various Rubbers.
Testing Limit : Temperature - 200° |
|
|
|
Rubber
Viscometer |
|
 |
[RUBBER VISCOMETER]
For Measuring the Specific Pattern of Rubber itself.
Testing Limit : Temperature - 200° |
|
|
|
Inspection
Projector |
|
 |
[INSPECTION PROJECTOR]
For Measuring item's size precisely, it is inspected precisely
through the Magnifying Shadow.
Testing Limit : Diameter - φ400mm
Unit - 1/1000mm |
|
|
|
